سوالی دارید ? مطرح بفرمایید
مقاله: Automated planning of concrete joint layouts with 4D-BIM
Authors: Moslem Sheikhkhoshkara, Farzad Pour Rahimiana,⁎, Mohammad Hossein Kavehb
M. Reza Hosseinic, David J. Edwardsd
Publish : Automation in Construction , 2019
Abstract
This study reports on developing an innovative approach for the parametric analysis of daylighting and visual comfort, through a sun Concrete pouring represents a major critical path activity that is often affected by design limitations, structural
considerations and on-site operational constraints. As such, meticulous planning is required to ensure that both
the aesthetic and structural integrity of joints between cast in-situ components is achieved. Failure to adequately
plan concrete pouring could lead to structural defects, construction rework or structural instability, all having
major financial implications. Given the inherent complexity of large-scale construction projects, the ‘manual
planning’ of concrete pouring is a challenging task and prone to human errors. Against this backdrop, this study
developed 4D Building Information Management (BIM) approach to facilitate automated concrete joint positioning
solution (as a proof of concept) for design professionals and contractors. The study first developed
structural model in Revit, then extracted spatial information regarding all construction joints and linked them to
considerations and on-site operational constraints. As such, meticulous planning is required to ensure that both
the aesthetic and structural integrity of joints between cast in-situ components is achieved. Failure to adequately
plan concrete pouring could lead to structural defects, construction rework or structural instability, all having
major financial implications. Given the inherent complexity of large-scale construction projects, the ‘manual
planning’ of concrete pouring is a challenging task and prone to human errors. Against this backdrop, this study
developed 4D Building Information Management (BIM) approach to facilitate automated concrete joint positioning
solution (as a proof of concept) for design professionals and contractors. The study first developed
structural model in Revit, then extracted spatial information regarding all construction joints and linked them to
Integration of parametric design into modular coordination: A construction waste reduction workflow
- مدیرارشد
- کتابخانه مقالات انگلیسی
| سال انتشار | 2018 |
| محل انتشار | Automation in Construction 88 (2018) 1–12 |
| نویسندگان | Saeed Banihashemi; Amir Tabadkani; M.Reza Hosseini |
مقاله: Integration Of Parametric Design into Modular Coordination : A Construction waste reduction workflow
این مقاله به دنبال کاهش میزان پرت مصالح مصرفی ساختمان های مدولار پیش ساخته می باشد، به گونه ای که با استفاده از گرس هاپر و گالاپاگوس این میزان به 2 درصد بر اساس استاندارد استفاده شده، کاهش پیدا کرده است.
Abstract
The construction industry is under pressure as to reduce the sizable quantities of construction waste generated during construction operations. Modular coordination (MC) and parametric design both have great potentials in reducing waste at the design stage. And anecdotal evidence suggests that great volumes of waste can be reduced through integration of parametric design into MC. The issue of proposing workflows in this context, however, is under-researched, and practical applications, if any, are at the rhetorical stage. To accomplish this, an integration attempt is made in this study to provide the details of a developed-and-experimented workflow for this purpose; a generative algorithm is developed through the Rhinoceros 3D-Grasshopper platform,
A review of specialist role definitions in "bim guides" and "standards"
- مدیرارشد
- کتابخانه مقالات انگلیسی
| سال انتشار | October 2017 |
| محل انتشار | Journal of Information Technology in Construction |
| نویسندگان | Kathryn Davies, Suzanne Wilkinson, Dermott McMeel |
مقاله: A review of specialist role definitions in "bim guides" and "standards"
:Abstract
Many handbooks and guides have been developed to assist with the adoption and implementation of BIM for organizations and projects. This paper examines the ways in which roles and responsibilities of BIM specialists are defined across an international selection of 36 of these documents. The purposes of BIM guides
are examined and categorized, and the expertise and intentions of their developers are considered. The number and variety of guides and standards available raises concern, as findings suggest that while BIM practice generally is becoming more standardized, BIM specialist roles may be developing in an uncoordinated
مقاله BIM adoption within Australian Small and Medium-sized Enterprises (SMEs): an innovation diffusion model
- مدیرارشد
- کتابخانه مقالات انگلیسی
مقاله: BIM Adoption Within Australian Small And Medium-sized Enterprises (SMEs): an innovation diffusion model
:Abstract
Despite the envisaged benefits of BIM adoption for SMEs, BIM in SMEs has remained an underrepresented area within the available academic literature. This study proposes and draws upon a framework grounded on innovation diffusion theory (IDT) to provide an illuminating insight into the current state of BIM and the main barriers to BIM adoption within Australian SMEs. Based on analyses of 135 questionnaires completed by SMEs through partial least squares structural equation modelling (PLS-SEM) and grounded on
Daylighting and visual comfort of oriental sun responsive skins: A parametric analysis
- مدیرارشد
- کتابخانه مقالات انگلیسی
مقاله: ِDaylighting and Visual Comfort of Oriental Sun Responsive Skins: A Parametric Analysis
موضوع: مقاله ای در خصوص سایه بان متحرک برای کنترل کیفیت روشنایی طبیعی در ژورنال Building Simulation - Springer
در این مقاله سعی شده است که با استفاده از الگوی اسلامی (شمسه ایرانی) به همراه لوور بتوان میزان انعکاس نور و میزان روشنایی طبیعی را بر مبنای دو پارامتر sDA و ASE برای یک یونیت اداری با استفاده از پلاگین های لیدی باگ و دیوا در گرس هاپر کنترل کرد
Daylighting and visual comfort of oriental sun responsive skins: A parametric analysis
Authors: Amir Tabadkani, Saeed Banihashemi, M.Reza Hosseini
Abstract
This study reports on developing an innovative approach for the parametric analysis of daylighting and visual comfort, through a sun responsive shading system. The objective is estimating the annual daylight metrics and indoor glare discomfort. To this end, a review of the literature was carried out on three key concepts: smart facades, visual comfort, and parametric design, in order to develop a dynamic pattern of an oriental system for enhancing the daylight and visual performance. Afterwards, two geometrical components (Rosette modules and louvers) were applied, using Grasshopper plug-in for Rhino and daylighting plug-in DIVA, to investigate the indoor daylight quality through different geometrical and physical properties. This resulted in
How BIM increased project safety and improved profitability for building owners and investors
- مدیرارشد
- کتابخانه مقالات انگلیسی
| سال انتشار | 2017 |
| محل انتشار | TUV SUD |
| نویسندگان | Tobias Schmidt |
مقاله: How BIM increased project safety and improved profitability for building owners and investors
Abstract
Modern construction projects, such as tunnels, bridges and rail tracks, are more complex than ever, as architects,engineers and builders integrate state-of-the-art materials and technologies into designs to increase usability,maximise resource efficiencies and promote sustainability.The most advanced building planning and development technologies are therefore required to successfully navigate the decision-making process and to avoid costly and potentially harmful choices. To meet this need, the architecture, engineering and construction (AEC) industry is turning to digitisation, particularly in streamlining and optimising processes and
Sustainability by Information and Communication Technology: A Paradigm Shift for Construction...
- مدیرارشد
- کتابخانه مقالات انگلیسی
| سال انتشار | October 2017 |
| محل انتشار | Journal of Cleaner Production |
| نویسندگان | reza hosseini, saeed banihashemi, et all |
مقاله: ...Sustainability by Information and Communication Technology: A Paradigm Shift for Construction
:Abstract
Anecdotal evidence refers to impacts of Information and Communication Technology (ICT) as an enabler of sustainable delivery of construction projects. This study aims to explore such claims through reflecting on and sharing the experiences of project managers in a developing country. It used a ‘sequential exploratory design’ (qual→Quan) mixed method approach containing sixteen semi-structured interviews followed by Partial Least Squares Structural Equation Modeling (PLS-SEM) analysis of 101 survey questionnaires
مقاله Mapping the managerial areas of Building Information Modeling (BIM) using scientometric analysis
- مدیرارشد
- کتابخانه مقالات انگلیسی
مقاله: Mapping the Manageral Areas Of Building Information Modelling
:Abstract
The successful adoption of Building Information Modeling (BIM) leads to the subsequent need for improving management practices and stakeholders' relationships. Previous studies have attempted to explore solutions for non-technical issues; however, a systematic and quantitative review of the details of non-technical field, namely, the managerial areas of BIM (MA–BIM), seems to be missing. Hence, a scientometric approach is used to construct knowledge maps in MA–BIM, thereby allowing bibliometric data to provide an objective and accurate perspective in the field as a whole. Through keyword and abstract term analysis of 126 related papers published from 2007 to 2015, an integrated
Sustainable Delivery of Megaprojects in Iran: Integrated Model of Contextual Factors
- مدیرارشد
- کتابخانه مقالات انگلیسی
| سال انتشار | 2018 |
| محل انتشار | Journal of Management in Engineering |
| نویسندگان | Farzad Ghodoosi;Saeed Banihashemi; Igor Martek; M.Reza Hosseini |
مقاله: Sustainable Delivery of MegaProjects in Iran: Integrated Model of Contextual Factors
Abstract
This study develops an integrated model of the main contextual factors that affect sustainable delivery of megaprojects in Iran. The inputs to the model are based on a comprehensive literature review affecting the “triple bottom line” of sustainability, as measured in economic, environmental, and social costs. Innovation diffusion theory and extralogical laws of imitation inform the theoretical points of departure. The model inputs were customized for the context of Iran, and a structural equation model was developed, using data